Insider's Guide to Furniture & the Home Furnishings Industry

Jeff Frank is a 40 year veteran of the furniture industry who is happy to answer your questions about furniture! Ask your question today!

Any content, trademark’s, or other material that might be found on the SimplicitySofas.com website that is not SimplicitySofas.com’s property remains the copyright of its respective owner/s. In no way does SimplicitySofas.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.

Why aren't sofas repairable, replaceable & recyclable?

Sunday, December 23, 2018

Comments: 0

Repairable, sustainable, recyclable furniture costs far more to make. Most customers are not willing to pay hundreds (or thousands) of dollars more for sofas that have these features.

Making repairable, sustainable, recyclable furniture is exactly what Simplicity Sofas, has done for the past 12 years.

Simplicity Sofas uses a modular system to create thousands of different items.

There are a total of 40 different replaceable, interchangeable components in the entire system, but 80% of the products use the same 15 component parts.

Those 15 interchangeable parts can create thousands of different sofa, loveseat, chair, sleeper and sectional combinations.

Here is an example of a basic sofa. It is made from 6 component parts. These include 2 arms, 1 back, 1 base, cushions and legs.

04_Lorelei_Sofa_Ottoman

The sofa is shipped unassembled. Assembly takes 15 minutes. No tools are needed.

[Here is a video showing a 7 year old and a 10 year old assembling a sofa in less than 5 minutes.]

The furniture is designed to be assembled, dis-assembled and re-assembled dozens of times with no loss of strength or durability.

Below is another sofa. It uses the identical back, base and cushions. Only the arms and legs are different.

08_Ashton-Slipcover-Brook-Mist

Changing those two frame parts transforms the look of the entire sofa.

The style has been modified from modern to traditional.

The sofa size has increased from 80" - 88".

Below is a third combination. The arms and cushions are exactly the same as in the first photo above.

The only things that have changed are the lengths of the backs and bases and the leg style.

The sectional wedge corner piece shown uses an additional 3 component parts that were not used for the sofas.

xRTA sectional (4)

The modular design allows any individual part to be replaced by the customer in a few minutes in their own home.

Cushions are made with extra wide zippers. The inside of the covers are lined with fabric.

Customers can easily replace cushion covers or cores if they ever become damaged or worn out.

Individual arms, backs, bases or legs can also be replaced if necessary.

If a fabric becomes worn or damaged and is no longer available, this furniture can be completely recovered with a different fabric.

A tightly fitted slipcover goes over the original upholstery.

The second photo above shows a sofa with slipcover. (We also make identical looking sofas with skirts that are not slipcovered.)

Simplicity Sofas is built to last 20 years and more.

The cushions are made with thick high quality 2.5 density Ultracel foam or Spring down construction.

Most of our customers can get 10 years use from our cushions. Cushion cores (and covers) are easily (and inexpensively) replaceable if they do wear out or become damaged.

The frames are constructed with select grade solid oak lumber. Below is a photo of one of our frames.

Solid oak quick assembly frame

Making furniture this way is expensive. Even if we were using the same quality of materials used in mass produced furniture it would be substantially more expensive.

Modular designs with replaceable parts require more raw materials. They require more labor than needed to build a similar looking conventional sofa.

The additional material and labor costs do not fully address the sustainability factor. Better quality materials and superior craftsmanship are also needed.

That is why solid oak lumber is used instead of plywood.

High quality furniture frames are typically made with #2 grade lumber.

#2 lumber is allowed to have splits, knotholes, warping and other defects. Those defects are what lead to frame problems over the long run.

#1 common lumber has fewer of these potential problems.

Select grade should have almost no defects. Select grade costs twice as much per board foot as #2.

Simplicity Sofas uses "select" grade lumber.

Normally select grade is used only for exposed wood. It is never used for frames that cannot be seen.

That additional cost is wasted in most furniture. You don’t need a frame that can last 50 years if the cushions or fabric only last 3 years.

Standard quality cushions, fabric, foam etc. will not last long enough to take advantage of top quality frames.

That means the quality of all of those parts must be upgraded as well.

The lifespan of a sofa made with the best quality materials is often limited to the failure of the most fragile part of that sofa.

Repairs and replacement of a sofa's parts can be prohibitively expensive. Often it costs as much as buying a new one.

Simplicity Sofas furniture is designed so that all parts can be easily and inexpensively replaced.

It is repairable, sustainable and recyclable.

Furniture made this way would be prohibitively expensive if sold through retailers.

Retail prices are typically double the manufacturing cost.

Simplicity Sofas bypasses retailers and sells directly to consumers through its online website www.simplicitysofas.com.

Here is one more sofa look. This uses the same exact components as the sofas shown above. Only the arms are different.

The solid oak frame in this leather sofa is identical to the one shown above.

Revised 2Full Size Megan Leather copy

Comments RSS feed for comments on this page

There are no comments yet. Be the first to add a comment by using the form below.

Search